PiercerDeb.com
Procedure for an Industrial Piercing
|
Step 1:
After the ear is marked and cleaned it is held with forceps at
the proper angle and the needle is quickly pushed through at the
mark. |
|
Step 2:
The jewelry is butted to the needle and inserted while pushing
out the needle. |
|
Step 3:
With the jewelry sitting comfortably recheck the angle for second
piercing. |
|
Step 4:
The ear is then again held with forceps at the proper angle and
the needle is quickly pushed through at the mark. |
|
Step 5:
The jewelry is butted to the needle and inserted while pushing
out the needle. |
|
Step 6:
Notice the extra length available to the ear for any swelling.
|
|
Step 7:
Aftercare!!
Take care of your piercing!! |
|
Please be advised that these step by step views of the above procedure
are in no way intended for teaching. They are general ideas for those
of you who wonder how it's done. Piercers do vary in their own style
so you may come across some differences but the basics should be the same.
~PiercerDeb
All photos and images on these pages are ©PiercerDeb 2002-2004
This site built and maintained by SharpTattoos.
